## Traintastic language file: German (DE)

#board:delete_tile=Delete tile
#board:move_tile=Move tile
#board:resize_tile=Resize tile
#board:resize_to_contents=Resize to contents

#board_tile.rail.block:input_map=Sensors

#board_tile.rail.sensor:input=Input
#board_tile.rail.sensor:invert=Invert
#board_tile.rail.sensor:type=Type

#board_tile:output_map=Outputs

#category:general=General
#category:info=Info

#class_id:board_tile.rail.block=Block
#class_id:board_tile.rail.bridge_45_left=Bridge 45° (left)
#class_id:board_tile.rail.bridge_45_right=Bridge 45° (right)
#class_id:board_tile.rail.bridge_90=Bridge 90°
#class_id:board_tile.rail.buffer_stop=Buffer stop
#class_id:board_tile.rail.cross_45=Crossover 45°
#class_id:board_tile.rail.cross_90=Crossover 90°
#class_id:board_tile.rail.curve_45=Curved track 45°
#class_id:board_tile.rail.curve_90=Curved track 90°
#class_id:board_tile.rail.sensor=Sensor
#class_id:board_tile.rail.signal_2_aspect=Signal (2 aspects)
#class_id:board_tile.rail.signal_3_aspect=Signal (3 aspects)
#class_id:board_tile.rail.straight=Straight track
#class_id:board_tile.rail.tunnel=Tunnel
#class_id:board_tile.rail.turnout_3way=Turnout 3-way
#class_id:board_tile.rail.turnout_doubleslip=Double slip
#class_id:board_tile.rail.turnout_left_45=Turnout left 45°
#class_id:board_tile.rail.turnout_left_90=Turnout left 90°
#class_id:board_tile.rail.turnout_left_curved=Turnout left curved
#class_id:board_tile.rail.turnout_right_45=Turnout right 45°
#class_id:board_tile.rail.turnout_right_90=Turnout right 90°
#class_id:board_tile.rail.turnout_right_curved=Turnout right curved
#class_id:board_tile.rail.turnout_singleslip=Single slip
#class_id:board_tile.rail.turnout_wye=Turnout wye
#class_id:command_station.dccplusplus_serial=DCC++ (serial)
#class_id:command_station.loconet_serial=LocoNet (serial)
#class_id:command_station.loconet_tcp_binary=LocoNet (TCP binary)
#class_id:command_station.virtual=Virtual
#class_id:command_station.xpressnet_serial=XpressNet (serial)
#class_id:command_station.z21=Z21
#class_id:controller.wlanmaus=WLANmaus
#class_id:input.loconet=LocoNet input
#class_id:input.xpressnet=XpressNet input
#class_id:output.loconet=LocoNet output
#class_id:vehicle.rail.freight_car=Freight car
#class_id:vehicle.rail.locomotive=Locomotive

#clock:day=Day
#clock:hour=Hour
#clock:minute=Minute
#clock:month=Month
#clock:multiplier=Multiplier
#clock:year=Year

#command_station.dccplusplus_serial:dcc_plus_plus=DCC++(EX)

#command_station.loconet_serial:interface=Interface

#command_station.xpressnet_serial:interface=Interface
#command_station.xpressnet_serial:s88_module_count=S88 module count
#command_station.xpressnet_serial:s88_start_address=S88 start address

#command_station.z21:filtered_main_current=Filtered main current
#command_station.z21:firmware_version=Firmware verion
#command_station.z21:hardware_type=Hardware type
#command_station.z21:high_temperature=High temperature
#command_station.z21:main_current=Main current
#command_station.z21:power_lost=Power lost
#command_station.z21:prog_current=Prog current
#command_station.z21:programming_mode_active=Programming mode active
#command_station.z21:serial_number=Serial number
#command_station.z21:short_circuit=Short circuit
#command_station.z21:short_circut_external=Short circuit external
#command_station.z21:short_circut_internal=Short circuit internal
#command_station.z21:supply_voltage=Supply voltage
#command_station.z21:temperature=Temperature
#command_station.z21:vcc_voltage=VCC voltage

#command_station:emergency_stop=Emergency stop
#command_station:online=Online
#command_station:power_on=Power on

#controller.wlanmaus:debug_log=Enable command logging (debug)

#controller:active=Active

#decoder:functions=Functions
#decoder:long_address=DCC long address
#decoder:protocol=Protocol

#decoder_function:function=Function
#decoder_function:number=Number
#decoder_function:type=Type

#decoder_function_function:generic=Generic
#decoder_function_function:light=Light
#decoder_function_function:mute=Mute
#decoder_function_function:smoke=Smoke
#decoder_function_function:sound=Sound

#decoder_function_type:always_off=Always off
#decoder_function_type:always_on=Always on
#decoder_function_type:hold=Push 'n hold
#decoder_function_type:momentary=Momentary
#decoder_function_type:on_off=On/Of

#decoder_protocol:auto=Auto
#decoder_protocol:custom=Custom
#decoder_protocol:dcc=DCC

#direction:forward=Forward
#direction:reverse=Reverse

#hardware:address=Address
#hardware:command_station=Command station
#hardware:input_monitor=Input monitor
#hardware:loconet=LocoNet
#hardware:output_keyboard=Output keyboard
#hardware:speed_steps=Speed steps
#hardware:xpressnet=XpressNet

#input_list:bus=Bus

#input_map_item.block:input=Input
#input_map_item.block:invert=Invert
#input_map_item.block:type=Type

#ip:hostname=Hostname
#ip:port=Port

language:de-de=Deutsch (Deutschland)
language:en-us=Englisch (USA)
language:nl-nl=Niederländisch (Die Niederlande)

length_unit:cm=cm
length_unit:ft=ft
length_unit:in=in
length_unit:m=m
length_unit:mm=mm
length_unit:yd=yd

#list:add=Add
#list:edit=Edit
#list:move_down=Move down
#list:move_up=Move up
#list:remove=Remove

#loconet_command_station:custom=Custom
#loconet_command_station:digikeijs_dr5000=Digikeijs DR5000
#loconet_command_station:uhlenbrock_intellibox=Uhlenbrock Intellibox

#loconet_serial_interface:custom=Custom
#loconet_serial_interface:digikeijs_dr5000=Digikeijs DR5000
#loconet_serial_interface:rosoft_loconet_interface=RoSoft LocoNet interface

#lua.script:start=Start
#lua.script:stop=Stop

#lua_script:state=State

#message:C1001=Loading world failed (%1)
#message:C1002=Creating client failed (%1)
#message:C1003=Can't write to settings file (%1)
#message:C1004=Reading world failed (%1) (%2)
#message:C1005=Saving world failed (%1)
#message:C1006=Creating world backup failed (%1)
#message:C1007=Creating world backup directory failed (%1)
#message:C2001=Address already used at #%1
#message:C2002=DCC++ only supports the DCC protocol
#message:C2003=DCC++ doesn't support DCC long addresses below 128
message:C9999=%1
#message:D2001=TX: %1
#message:D2002=RX: %1
#message:D2003=Unknown xHeader 0x%1
#message:D2004=%1 TX: %2
#message:D2005=%1 RX: %2
#message:D2006=Unknown message: %1
#message:D2007=Input %1 = %2
#message:D2008=Output %1 = %1
#message:D2009=Slot %1 = %2
#message:D2010=Slot %1 = Free
message:D9999=%1
#message:E1001=Invalid world UUID: %1
#message:E1002=World %1 doesn't exist
#message:E1003=UDP receive error (%1)
#message:E1004=TCP accept error (%1)
#message:E1005=Socket shutdown failed (%1)
#message:E1006=Socket write failed (%1)
#message:E1007=Socket read failed (%1)
#message:E1008=Socket acceptor cancel failed (%1)
#message:E2001=Serial write failed (%1)
#message:E2002=Serial read failed (%1)
#message:E2003=Make address failed (%1)
#message:E2004=Socket open failed (%1)
#message:E2005=Socket connect failed (%1)
#message:E2006=Socket bind failed (%1)
#message:E2007=Socket write failed (%1)
#message:E2008=Socket read failed (%1)
#message:E2009=Socket receive failed (%1)
#message:E2010=Serial port open failed (%1)
#message:E2011=Socket send failed (%1)
#message:E2012=Function number already in use
message:E9999=%1
#message:F1001=Opening TCP socket failed (%1)
#message:F1002=TCP socket address reuse failed (%1)
#message:F1003=Binding TCP socket failed (%1)
#message:F1004=TCP socket listen failed (%1)
#message:F1005=Opening UDP socket failed (%1)
#message:F1006=UDP socket address reuse failed (%1)
#message:F1007=Binding udp socket failed (%1)
#message:F9001=Creating ua state failed
#message:F9002=Running script failed (%1)
#message:F9003=Calling function failed (%1)
message:F9999=%1
message:I1001=Traintastic v%1 %2
#message:I1002=Settings file not found, using defaults
#message:I1003=Client connected
#message:I1004=Connection lost
#message:I1005=Building world index
#message:I2001=Unknown loco address: %1
#message:I9999=%1
#message:N1001=Received signal: %1
#message:N1002=Created new world
#message:N1003=Restaring
#message:N1004=Shutting down
#message:N1005=Discovery enabled
#message:N1006=Discovery disabled
#message:N1007=Listening at %1:%2
#message:N1008=Loaded settings
#message:N1009=Saved settings
#message:N1010=Edit mode: enabled
#message:N1011=Edit mode: disabled
#message:N1012=Communication: enabled
#message:N1013=Communication: disabled
#message:N1014=Power: on
#message:N1015=Power: off
#message:N1016=Running
#message:N1017=Stopped
#message:N1018=Mute: enabled
#message:N1019=Mute: disabled
#message:N1020=Smoke: enabled
#message:N1021=Smoke: disabled
#message:N1022=Saved world: %1
message:N9999=%1
#message:W1001=Discovery disabled, only allowed on port %1
#message:W1002=Setting %1 doesnt exist
#message:W2001=Received malformed data dropped %1 bytes
#message:W2002=Command station doesn't support functions above F%1
#message:W2003=Command station doesn't support %1 speedsteps using %2
message:W9999=%1

object:id=Id
object:name=Name
object:notes=Notizen

output_action:none=Kein
output_action:off=Aus
output_action:on=Auf
output_action:pulse=Puls

#output_list:bus=Bus

#output_map.signal:key=Aspect

#output_map.turnout:key=Position

output_map:use=Benutzen

#protocol.dccplusplus:debug_log=Enable command logging (debug)
#protocol.dccplusplus:use_ex=Use DCC++EX commands

#protocol.loconet:command_station=Command station
#protocol.loconet:debug_log_input=Enable input logging
#protocol.loconet:debug_log_output=Enable output logging
#protocol.loconet:debug_log_rx_tx=Enable RX/TX logging

#protocol.xpressnet:command_station=Command station
#protocol.xpressnet:debug_log=Enable logging (debug)
#protocol.xpressnet:use_emergency_stop_locomotive_command=Use short emergency stop locomotive command
#protocol.xpressnet:use_function_state_commands=Use function state commands
#protocol.xpressnet:use_roco_f13_f20_command=Use Roco F13-F20 command

#qtapp.connect_dialog:connect=Connect
#qtapp.connect_dialog:connect_to_server=Connect to server
#qtapp.connect_dialog:connected=Connected
#qtapp.connect_dialog:connecting=Connecting
#qtapp.connect_dialog:password=Password
#qtapp.connect_dialog:server=Server
#qtapp.connect_dialog:username=Username

#qtapp.mainmenu:about=About
#qtapp.mainmenu:connect_to_server=Connect to server
#qtapp.mainmenu:connection=Connection
#qtapp.mainmenu:disconnect_from_server=Disconnect from server
qtapp.mainmenu:export_world=Welt exportieren
qtapp.mainmenu:file=Datei
qtapp.mainmenu:fullscreen=Vollbildschirm
#qtapp.mainmenu:hardware=Hardware
#qtapp.mainmenu:help=Help
qtapp.mainmenu:import_world=Welt importieren
#qtapp.mainmenu:load_world=Load world
qtapp.mainmenu:new_world=Neue Welt
#qtapp.mainmenu:objects=Objects
#qtapp.mainmenu:power=Power
#qtapp.mainmenu:quit=Quit
#qtapp.mainmenu:restart_server=Restart server
#qtapp.mainmenu:restart_server_question=Are you sure you want to restart the server?
#qtapp.mainmenu:save_world=Save world
#qtapp.mainmenu:server=Server
#qtapp.mainmenu:server_log=Server log
#qtapp.mainmenu:server_settings=Server settings
#qtapp.mainmenu:settings=Settings
#qtapp.mainmenu:shutdown_server=Shutdown server
#qtapp.mainmenu:shutdown_server_question=Are you sure you want to shutdown the server?
#qtapp.mainmenu:toolbar=Toolbar
#qtapp.mainmenu:tools=Tools
#qtapp.mainmenu:view=View
#qtapp.mainmenu:world=World
#qtapp.mainmenu:world_properties=World properties

qtapp.message_box:no=Nein
qtapp.message_box:yes=Jawohl

qtapp.object_select_list_dialog:cancel=Abbrechen
qtapp.object_select_list_dialog:ok=OK
#qtapp.object_select_list_dialog:select_object=Select object

#qtapp.settings.board:show_block_sensor_states=Show block sensor states

#qtapp.settings.developer:dont_load_fallback_language=Don't load fallback language
#qtapp.settings.developer:log_missing_strings=Log missing translations
#qtapp.settings.developer:log_missing_strings_dir=Missing translations log directory

qtapp.settings.general:language=Sprache

qtapp.settings:board=Schalttafel
qtapp.settings:developer=Entwickler
qtapp.settings:general=Allgemein

qtapp.world_list_dialog:cancel=Abbrechen
#qtapp.world_list_dialog:load=Load
#qtapp.world_list_dialog:world_list=World list

#qtapp:board_properties=Board properties
#qtapp:grid=Grid
#qtapp:grid_dot=Dot
#qtapp:grid_line=Line
#qtapp:grid_none=None
#qtapp:toggle_mute=Toggle mute
#qtapp:toggle_offline_online=Toggle connection
#qtapp:toggle_power=Toggle power
#qtapp:toggle_smoke=Toggle smoke
qtapp:zoom_in=Hineinzoomen
qtapp:zoom_out=Rauszoomen

#rail_vehicle_list:type=Type

#sensor_type:occupy_detector=Occupy detector
#sensor_type:reed_switch=Reed switch

serial:baudrate=Baudrate
#serial:flow_control=Flow control
#serial:port=Port

serial_flow_control:hardware=Hardware
#serial_flow_control:none=None

server_log:code=Code
server_log:message=Meldung
server_log:object=Objekt
server_log:time=Zeit

#settings:allow_client_server_restart=Allow client server restart
#settings:allow_client_server_shutdown=Allow client server shutdown
#settings:auto_save_world_on_exit=Auto save world on exit
#settings:discoverable=Discoverable
#settings:enable_file_logger=Enable file logger
#settings:localhost_only=Localhost only
#settings:memory_logger_size=Memory logger size
settings:port=Port
#settings:save_world_uncompressed=Save world uncompressed

#signal_aspect:proceed=Proceed
#signal_aspect:proceed_reduced_speed=Proceed, reduced speed
#signal_aspect:stop=Stop

speed_unit:kmph=km/h
speed_unit:mph=mph
speed_unit:mps=m/s

#throttle_object_list:throttle=Throttle

#train:lob=LOB
train:speed_max=Maximale Geschwindigkeit
#train:vehicles=Vehicles
train:weight=Gewicht

#turnout_position:left=Left
#turnout_position:right=Right
#turnout_position:straight=Straight

#vehicle.rail.freight_car:cargo_weight=Cargo weight

#vehicle.rail:decoder=Decoder
#vehicle.rail:lob=LOB
vehicle.rail:speed_max=Maximale Geschwindigkeit
vehicle.rail:total_weight=Total weight
vehicle.rail:train=Zug
vehicle.rail:weight=Gewicht

weight_unit:kg=kg
#weight_unit:long_tons=Long tons
#weight_unit:short_tons=Short tons
weight_unit:ton=ton

#world:boards=Boards
#world:clock=Clock
#world:command_stations=Command stations
#world:controllers=Controllers
#world:decoders=Decoders
#world:edit=Edit world
#world:inputs=Inputs
#world:lua_scripts=Lua scripts
#world:mute=Mute
#world:no_smoke=No smoke
world:offline=Trennen
world:online=Verbinden
#world:outputs=Outputs
#world:power_off=Power off
#world:power_on=Power on
#world:rail_vehicles=Rail vehicles
#world:run=Run
#world:scale=Scale
#world:scale_ratio=Scale ratio
#world:stop=Stop
world:trains=Züge
world:uuid=UUID

#world_scale:custom=Custom
world_scale:h0=H0 (1:87)
world_scale:n=N (1:160)
world_scale:tt=TT (1:120)
world_scale:z=Z (1:220)

#xpressnet_command_station:custom=Custom
xpressnet_command_station:digikeijs_dr5000=Digikeijs DR5000
xpressnet_command_station:roco_10764=Roco 10764

#xpressnet_serial_interface:custom=Custom
xpressnet_serial_interface:lenz_li100=Lenz LI100
xpressnet_serial_interface:lenz_li100f=Lenz LI100F
xpressnet_serial_interface:lenz_li101f=Lenz LI101F
xpressnet_serial_interface:rosoft_s88xpressnetli=RoSoft s88XpressNetLI