## Traintastic language file: German (DE)

#board:delete_tile=Delete tile
#board:move_tile=Move tile
#board:resize_tile=Resize tile
#board:resize_to_contents=Resize to contents

#board_settings.color_scheme:dark=Dark
#board_settings.color_scheme:light=Light

board_tile.misc.push_button:color=Farbe

#board_tile.rail.block:input_map=Sensors

#board_tile.rail.direction_control:state=State
board_tile.rail.direction_control:use_a_to_b=Use: A → B
board_tile.rail.direction_control:use_b_to_a=Use: A ← B
board_tile.rail.direction_control:use_both=Use: A ⇄ B
board_tile.rail.direction_control:use_none=Use: A 🛇 B

#board_tile.rail.link:link=Link

board_tile.rail.sensor:input=Eingang
board_tile.rail.sensor:invert=Umkehren
#board_tile.rail.sensor:type=Type

board_tile:output_map=Ausgänge

#category:developer=Developer
#category:general=General
#category:info=Info
#category:log=Log
category:network=Netzwerk

class_id:board_tile.misc.push_button=Druckknopf
#class_id:board_tile.rail.block=Block
#class_id:board_tile.rail.bridge_45_left=Bridge 45° (left)
#class_id:board_tile.rail.bridge_45_right=Bridge 45° (right)
#class_id:board_tile.rail.bridge_90=Bridge 90°
#class_id:board_tile.rail.buffer_stop=Buffer stop
#class_id:board_tile.rail.cross_45=Crossover 45°
#class_id:board_tile.rail.cross_90=Crossover 90°
#class_id:board_tile.rail.curve_45=Curved track 45°
#class_id:board_tile.rail.curve_90=Curved track 90°
#class_id:board_tile.rail.decoupler=Decoupler
#class_id:board_tile.rail.direction_control=Direction control
#class_id:board_tile.rail.link=Link
#class_id:board_tile.rail.one_way=One way
class_id:board_tile.rail.sensor=Sensor
#class_id:board_tile.rail.signal_2_aspect=Signal (2 aspects)
#class_id:board_tile.rail.signal_3_aspect=Signal (3 aspects)
#class_id:board_tile.rail.straight=Straight track
class_id:board_tile.rail.tunnel=Tunnel
#class_id:board_tile.rail.turnout_3way=Turnout 3-way
#class_id:board_tile.rail.turnout_doubleslip=Double slip
#class_id:board_tile.rail.turnout_left_45=Turnout left 45°
#class_id:board_tile.rail.turnout_left_90=Turnout left 90°
#class_id:board_tile.rail.turnout_left_curved=Turnout left curved
#class_id:board_tile.rail.turnout_right_45=Turnout right 45°
#class_id:board_tile.rail.turnout_right_90=Turnout right 90°
#class_id:board_tile.rail.turnout_right_curved=Turnout right curved
#class_id:board_tile.rail.turnout_singleslip=Single slip
#class_id:board_tile.rail.turnout_wye=Turnout wye
class_id:interface.dccplusplus=DCC++
class_id:interface.ecos=ECoS
class_id:interface.hsi88=HSI-88
class_id:interface.loconet=LocoNet
class_id:interface.traintastic_diy=Traintastic DIY
class_id:interface.withrottle=WiThrottle
class_id:interface.wlanmaus=WLANmaus
class_id:interface.xpressnet=XpressNet
class_id:interface.z21=Z21
#class_id:vehicle.rail.freight_car=Freight car
class_id:vehicle.rail.locomotive=Lokomotive

clock:day=Tag
#clock:debug_log=Debug log
#clock:freeze=Freeze
clock:hour=Stunde
clock:minute=Minute
clock:month=Monat
clock:multiplier=Multiplikator
clock:year=Jahr

color:aqua=Aqua
color:black=Schwarz
color:blue=Blau
color:fuchsia=Fuchsie
color:gray=Grau
color:green=Grün
color:lime=Lime
color:maroon=Maroon
color:navy=Navy
color:olive=Olive
color:purple=Violett
color:red=Rot
color:silver=Silber
color:teal=Blaugrün
color:white=Weiß
color:yellow=Gelb

#dccplusplus_channel:dcc_accessory=DCC accessory
dccplusplus_channel:output=Ausgang
#dccplusplus_channel:turnout=Turnout

#dccplusplus_settings:startup_delay=Startup delay
#dccplusplus_settings:use_ex=Use DCC++EX commands

#decoder:functions=Functions
#decoder:long_address=DCC long address
#decoder:protocol=Protokoll

decoder_function:function=Funktion
decoder_function:number=Nummer
decoder_function:type=Typ

#decoder_function_function:generic=Generic
#decoder_function_function:light=Light
#decoder_function_function:mute=Mute
#decoder_function_function:smoke=Smoke
#decoder_function_function:sound=Sound

#decoder_function_type:always_off=Always off
#decoder_function_type:always_on=Always on
#decoder_function_type:hold=Push 'n hold
#decoder_function_type:momentary=Momentary
#decoder_function_type:on_off=On/Of

#decoder_protocol:auto=Auto
#decoder_protocol:custom=Custom
#decoder_protocol:dcc=DCC

decoupler_state:activated=Aktiviert
decoupler_state:deactivated=Deaktiviert

direction:forward=Vorwärts
direction:reverse=Rückgäng

direction_control_state:a_to_b=A → B
direction_control_state:b_to_a=A ← B
direction_control_state:both=A ⇄ B
direction_control_state:none=A 🛇 B

ecos_channel:ecos_detector=ECoS Detector

hardware:address=Adresse
#hardware:channel=Channel
hardware:command_station=Zentrale
hardware:dcc=DCC
hardware:dccplusplus=DCC++
#hardware:debug_log_input=Log input changes
#hardware:debug_log_output=Log output changes
#hardware:debug_log_rx_tx=Log all communication
#hardware:decoders=Decoders
hardware:ecos=ECoS
#hardware:identifications=Identifications
#hardware:input_monitor=Input monitor
hardware:inputs=Eingänge
#hardware:interface=Interface
hardware:loconet=LocoNet
hardware:motorola=Motorola
#hardware:output_keyboard=Output keyboard
hardware:outputs=Ausgänge
hardware:s88=S88
#hardware:speed_steps=Speed steps
#hardware:throttles=Throttles
hardware:xpressnet=XpressNet
hardware:z21=Z21

hsi88:s88_left=S88 Links
hsi88:s88_middle=S88 Mitte
hsi88:s88_right=S88 Rechts

identification:opc_multi_sense_direction=OPC_MULTI_SENSE Richtung

#input_list:bus=Bus

input_map_item.block:input=Eingäng
input_map_item.block:invert=Umkehren
input_map_item.block:type=Typ

interface.dccplusplus:dcc_plus_plus=DCC++(EX)

interface.ecos:ecos=ECoS
interface.ecos:ecos_detector=ECoS detector
interface.ecos:s88=S88

#interface.hsi88:modules_left=Modules left
#interface.hsi88:modules_middle=Modules middle
#interface.hsi88:modules_right=Modules right

#interface.loconet:interface=Interface

#interface.traintastic_diy:traintastic_diy=Traintastic DIY

#interface.withrottle:withrottle=WiThrottle

#interface.xpressnet:interface=Interface
#interface.xpressnet:s88_module_count=S88 module count
#interface.xpressnet:s88_start_address=S88 start address

#interface.z21:firmware_version=Firmware version
#interface.z21:hardware_type=Hardware type
interface.z21:serial_number=Seriennummer

#interface:online=Online
#interface:status=Status
interface:type=Typ

#interface_status:error=Error
#interface_status:initializing=Initializing
#interface_status:offline=Offline
#interface_status:online=Online

ip:hostname=Hostname
ip:port=Port

language:de-de=Deutsch (Deutschland)
language:en-us=Englisch (USA)
language:it-it=Italienisch
language:nl-nl=Niederländisch (Die Niederlande)

length_unit:cm=cm
length_unit:ft=ft
length_unit:in=in
length_unit:m=m
length_unit:mm=mm
length_unit:yd=yd

list:add=Addieren
#list:edit=Edit
#list:move_down=Move down
#list:move_up=Move up
#list:remove=Remove

lncv_programmer:description=Beschreibung
#lncv_programmer:lncv_programmer=LNCV programmer
#lncv_programmer:module=Module
#lncv_programmer:other_module=Other module
lncv_programmer:read=Lesen
lncv_programmer:reading_lncv_x=LNCV %1 Lesen
lncv_programmer:reading_lncv_x_failed=Lesen von LNCV %1 fehlgeschlagen
#lncv_programmer:sending_start=Sending start
lncv_programmer:start=Start
#lncv_programmer:stop=Stop
#lncv_programmer:use_broadcast_address=Use broadcast address
lncv_programmer:value=Wert
#lncv_programmer:waiting_for_module_to_respond=Waiting for module to respond
lncv_programmer:write=Schreiben
lncv_programmer:writing_lncv_x=LNCV %1 Schreiben

#loconet_command_station:custom=Custom
loconet_command_station:digikeijs_dr5000=Digikeijs DR5000
loconet_command_station:uhlenbrock_ibcom=Uhlenbrock IB-Com
loconet_command_station:uhlenbrock_intellibox=Uhlenbrock Intellibox

#loconet_f9_f28:imm_packet=Direct (OPC_IMM_PACKET)
#loconet_f9_f28:uhlenbrock_extended=Uhlenbrock extended (OPC_A3, OPC_D4)

loconet_fastclock:master=Meister (Traintatic steuert die Uhr)
loconet_fastclock:off=Aus

loconet_interface_type:lbserver=LBServer
loconet_interface_type:serial=Serielle
loconet_interface_type:tcp_binary=TCP binär
loconet_interface_type:z21=Z21

#loconet_serial_interface:custom=Custom
loconet_serial_interface:digikeijs_dr5000=Digikeijs DR5000
loconet_serial_interface:rosoft_loconet_interface=RoSoft LocoNet interface

loconet_settings:command_station=Zentrale
#loconet_settings:echo_timeout=Echo timeout
loconet_settings:f9_f28=F9-F28
#loconet_settings:fast_clock=Fast clock
#loconet_settings:fast_clock_sync_enabled=Fast clock sync enabled
#loconet_settings:fast_clock_sync_interval=Fast clock sync interval
#loconet_settings:locomotive_slots=Locomotive slots
#loconet_settings:response_timeout=Response timeout

lua.script:disabled=Deaktiviert
lua.script:start=Start
#lua.script:stop=Stop

lua.script_list:start_all=Alle starten
#lua.script_list:stop_all=Stop all

#lua_script:state=State

lua_script_state:disabled=Deaktiviert
lua_script_state:error=Fehler
#lua_script_state:running=Running
#lua_script_state:stopped=Stopped

message:C1001=Laden der Welt fehlgeschlagen (%1)
#message:C1002=Creating client failed (%1)
message:C1003=Schreiben in Einstellungsdatei (%1) nicht möglich
#message:C1004=Reading world failed (%1) (%2)
#message:C1005=Saving world failed (%1)
#message:C1006=World-Backup erstellen fehlgeschlagen (%1)
#message:C1007=Creating world backup directory failed (%1)
#message:C1008=Creating backup directory failed (%1)
#message:C1009=Creating settings backup failed (%1)
#message:C1010=Exporting world failed (%1)
#message:C1011=Importing world failed (%1)
#message:C1012=Unknown class '%1', can't recreate object '%2'
#message:C1013=Can't load world saved with newer version, requires at least: %1
#message:C2001=Address already used at #%1
#message:C2002=DCC++ only supports the DCC protocol
#message:C2003=DCC++ doesn't support DCC long addresses below 128
#message:C2004=Can't get free slot
message:C9999=%1
#message:D1001=Resume %1 (multiplier: %2)
#message:D1002=Tick %1 (error: %2us)
#message:D1003=Freeze %1
#message:D2001=TX: %1
#message:D2002=RX: %1
#message:D2003=Unknown xHeader 0x%1
#message:D2004=%1 TX: %2
#message:D2005=%1 RX: %2
#message:D2006=Unknown message: %1
#message:D2007=Input %1 = %2
#message:D2008=Output %1 = %1
#message:D2009=Slot %1 = %2
#message:D2010=Slot %1 = Free
message:D9999=%1
#message:E1001=Invalid world UUID: %1
#message:E1002=World %1 doesn't exist
#message:E1003=UDP receive error (%1)
#message:E1004=TCP accept error (%1)
#message:E1005=Socket shutdown failed (%1)
#message:E1006=Socket write failed (%1)
#message:E1007=Socket read failed (%1)
#message:E1008=Socket acceptor cancel failed (%1)
#message:E2001=Serial write failed (%1)
#message:E2002=Serial read failed (%1)
#message:E2003=Make address failed (%1)
#message:E2004=Socket open failed (%1)
#message:E2005=Socket connect failed (%1)
#message:E2006=Socket bind failed (%1)
#message:E2007=Socket write failed (%1)
#message:E2008=Socket read failed (%1)
#message:E2009=Socket receive failed (%1)
#message:E2010=Serial port open failed (%1)
#message:E2011=Socket send failed (%1)
#message:E2012=Function number already in use
#message:E2013=Serial port set baudrate failed (%1)
#message:E2014=Serial port set data bits failed (%1)
#message:E2015=Serial port set stop bits failed (%1)
#message:E2016=Serial port set parity failed (%1)
#message:E2017=Serial port set flow control failed (%1)
#message:E2018=Timeout, no echo within %1ms
#message:E2019=Timeout, no response within %1ms
#message:E2020=Total number of modules may not exceed %1
#message:E9001=%1 (During execution of %2 event handler)
message:E9999=%1
#message:F1001=Opening TCP socket failed (%1)
#message:F1002=TCP socket address reuse failed (%1)
#message:F1003=Binding TCP socket failed (%1)
#message:F1004=TCP socket listen failed (%1)
#message:F1005=Opening UDP socket failed (%1)
#message:F1006=UDP socket address reuse failed (%1)
#message:F1007=Binding udp socket failed (%1)
#message:F9001=Creating Lua state failed
#message:F9002=Running script failed (%1)
#message:F9003=Calling function failed (%1)
message:F9999=%1
message:I1001=Traintastic v%1 %2
message:I1002=Einstellungsdatei nicht gefunden, Standardwerte werden verwendet
#message:I1003=Client connected
#message:I1004=Connection lost
#message:I1005=Building world index
#message:I1006=%1
#message:I1007=%1
#message:I1008=%1
#message:I2001=Unknown loco address: %1
#message:I2002=Hardware type: %1
#message:I2003=Firmware version: %1
#message:I2004=HSI-88: %1
#message:I2005=%1
#message:I9001=Stopped script
#message:I9002=%1
#message:I9999=%1
#message:N1001=Received signal: %1
#message:N1002=Created new world
#message:N1003=Restaring
#message:N1004=Shutting down
#message:N1005=Discovery enabled
#message:N1006=Discovery disabled
#message:N1007=Listening at %1:%2
#message:N1008=Loaded settings
#message:N1009=Saved settings
#message:N1010=Edit mode: enabled
#message:N1011=Edit mode: disabled
#message:N1012=Communication: enabled
#message:N1013=Communication: disabled
#message:N1014=Power: on
#message:N1015=Power: off
#message:N1016=Running
#message:N1017=Stopped
#message:N1018=Mute: enabled
#message:N1019=Mute: disabled
#message:N1020=Smoke: enabled
#message:N1021=Smoke: disabled
#message:N1022=Saved world: %1
#message:N1023=Simulation: disabled
#message:N1024=Simulation: enabled
#message:N1025=Exported world successfully
#message:N1026=Imported world successfully
#message:N2001=Simulation not supported
#message:N2002=No response from LNCV module %1 with address %2
#message:N2003=Stopped sending fast clock sync
#message:N9001=Starting script
message:N9999=%1
#message:W1001=Discovery disabled, only allowed on port %1
#message:W1002=Setting %1 doesnt exist
#message:W1003=Reading world %1 failed (libarchive error %2: %3)
#message:W2001=Received malformed data dropped %1 bytes
#message:W2002=Command station doesn't support functions above F%1
#message:W2003=Command station doesn't support %1 speedsteps using %2
message:W2004=Eingangsadresse %1 ist ungültig
message:W2005=Ausgangsadresse %1 ist ungültig
#message:W2006=Command station does not support loco slot %1
#message:W2007=Command station does not support the fast clock slot
#message:W2018=Timeout, no echo within %1ms
message:W9999=%1

object:id=Id
object:name=Name
object:notes=Notizen

opc_multi_sense_direction:in_sensor_address=In Sensoradresse
opc_multi_sense_direction:in_transponder_address=In Transponderadresse (Blücher GBM16XN)
opc_multi_sense_direction:none=Keiner

output_action:none=Kein
output_action:off=Aus
output_action:on=Auf
output_action:pulse=Puls

#output_list:bus=Bus

#output_map.decoupler:key=State

#output_map.signal:key=Aspect

#output_map.turnout:key=Position

output_map:use=Benutzen

#protocol.dccplusplus:debug_log=Enable command logging (debug)
#protocol.dccplusplus:use_ex=Use DCC++EX commands

protocol.loconet:command_station=Zentrale
#protocol.loconet:debug_log_input=Enable input logging
#protocol.loconet:debug_log_output=Enable output logging
#protocol.loconet:debug_log_rx_tx=Enable RX/TX logging

#protocol.xpressnet:command_station=Command station
#protocol.xpressnet:debug_log=Enable logging (debug)
#protocol.xpressnet:use_emergency_stop_locomotive_command=Use short emergency stop locomotive command
#protocol.xpressnet:use_function_state_commands=Use function state commands
#protocol.xpressnet:use_roco_f13_f20_command=Use Roco F13-F20 command

qtapp.connect_dialog:connect=Verbinden
qtapp.connect_dialog:connect_to_server=Verbinden zum Server
qtapp.connect_dialog:connected=Verbunden
qtapp.connect_dialog:connecting=Verbinden
qtapp.connect_dialog:password=Password
qtapp.connect_dialog:server=Server
#qtapp.connect_dialog:username=Username

#qtapp.error:cant_read_from_file_x=Can't read from file: %1
#qtapp.error:cant_write_to_file_x=Can't write to file: %1
#qtapp.error:server_error_x=Server error %1

qtapp.mainmenu:about=Über
#qtapp.mainmenu:close_world=Close world
qtapp.mainmenu:connect_to_server=Verbinden zum Server
qtapp.mainmenu:connection=Verbindung
#qtapp.mainmenu:disconnect_from_server=Disconnect from server
qtapp.mainmenu:export_world=Welt exportieren
qtapp.mainmenu:file=Datei
qtapp.mainmenu:fullscreen=Vollbildschirm
#qtapp.mainmenu:hardware=Hardware
qtapp.mainmenu:help=Hilfe
qtapp.mainmenu:import_world=Welt importieren
qtapp.mainmenu:load_world=Welt laden
qtapp.mainmenu:new_world=Neue Welt
#qtapp.mainmenu:objects=Objects
#qtapp.mainmenu:power=Power
#qtapp.mainmenu:programming=Programming
#qtapp.mainmenu:quit=Quit
qtapp.mainmenu:restart_server=Server neu starten
qtapp.mainmenu:restart_server_question=Möchten Sie den Server wirklich neu starten?
qtapp.mainmenu:save_world=Welt speichern
qtapp.mainmenu:server=Server
#qtapp.mainmenu:server_log=Server log
qtapp.mainmenu:server_settings=Server Einstellungen
qtapp.mainmenu:settings=Einstellungen
qtapp.mainmenu:shutdown_server=Server herunterfahren
qtapp.mainmenu:shutdown_server_question=Möchten Sie den Server wirklich herunterfahren?
qtapp.mainmenu:toolbar=Symbolleiste
#qtapp.mainmenu:tools=Tools
#qtapp.mainmenu:view=View
qtapp.mainmenu:world=Welt
qtapp.mainmenu:world_properties=Welteigenschaften

qtapp.message_box:no=Nein
qtapp.message_box:yes=Jawohl

qtapp.object_select_list_dialog:cancel=Abbrechen
qtapp.object_select_list_dialog:ok=OK
#qtapp.object_select_list_dialog:select_object=Select object

#qtapp.settings.board:color_scheme=Color scheme
#qtapp.settings.board:show_block_sensor_states=Show block sensor states
#qtapp.settings.board:turnout_draw_state=Draw turnout state

#qtapp.settings.developer:dont_load_fallback_language=Don't load fallback language
#qtapp.settings.developer:log_missing_strings=Log missing translations
#qtapp.settings.developer:log_missing_strings_dir=Missing translations log directory

qtapp.settings.general:language=Sprache

#qtapp.settings.statusbar:show_clock=Show clock

qtapp.settings:board=Schalttafel
qtapp.settings:developer=Entwickler
qtapp.settings:general=Allgemein
#qtapp.settings:statusbar=Status bar

qtapp.world_list_dialog:cancel=Abbrechen
#qtapp.world_list_dialog:load=Load
#qtapp.world_list_dialog:world_list=World list

#qtapp:board_properties=Board properties
#qtapp:export_world_failed=Export world failed
#qtapp:grid=Grid
#qtapp:grid_dot=Dot
#qtapp:grid_line=Line
#qtapp:grid_none=None
#qtapp:import_world_failed=Import world failed
#qtapp:next=Next
#qtapp:previous=Previous
#qtapp:toggle_mute=Toggle mute
#qtapp:toggle_offline_online=Toggle connection
#qtapp:toggle_power=Toggle power
#qtapp:toggle_smoke=Toggle smoke
#qtapp:traintastic_world=Traintastic world
qtapp:zoom_in=Hineinzoomen
qtapp:zoom_out=Rauszoomen

#rail_vehicle_list:type=Type

#ratio_unit:percent=%
#ratio_unit:ratio=

#sensor_type:occupy_detector=Occupy detector
#sensor_type:reed_switch=Reed switch

serial:baudrate=Baudrate
#serial:device=Device
#serial:flow_control=Flow control
#serial:port=Port

serial_flow_control:hardware=Hardware
serial_flow_control:none=Kein

server_log:code=Code
server_log:message=Meldung
server_log:object=Objekt
server_log:time=Zeit

#settings:allow_client_server_restart=Allow client server restart
#settings:allow_client_server_shutdown=Allow client server shutdown
#settings:auto_save_world_on_exit=Auto save world on exit
#settings:discoverable=Discoverable
#settings:enable_file_logger=Enable file logger
#settings:localhost_only=Localhost only
#settings:memory_logger_size=Memory logger size
settings:port=Port
#settings:save_world_uncompressed=Save world uncompressed

#signal_aspect:proceed=Proceed
#signal_aspect:proceed_reduced_speed=Proceed, reduced speed
#signal_aspect:stop=Stop

speed_unit:kmph=km/h
speed_unit:mph=mph
speed_unit:mps=m/s

#throttle_object_list:throttle=Throttle

train:lob=Länge über Puffer
train:speed_max=Maximale Geschwindigkeit
#train:vehicles=Vehicles
train:weight=Gewicht

traintastic_diy_interface_type:network_tcp=Netzwerk (TCP)
#traintastic_diy_interface_type:serial=Serial

#traintastic_diy_settings:debug_log_heartbeat=Log heartbeat communication
#traintastic_diy_settings:heartbeat_timeout=Heartbeat timeout

turnout_position:left=Links
turnout_position:right=Recht
turnout_position:straight=Gerade

#vehicle.rail.freight_car:cargo_capacity=Cargo capacity
#vehicle.rail.freight_car:cargo_loaded=Cargo loaded
#vehicle.rail.freight_car:cargo_weight=Cargo weight

#vehicle.rail:decoder=Decoder
#vehicle.rail:lob=LOB
vehicle.rail:speed_max=Maximale Geschwindigkeit
vehicle.rail:total_weight=Total weight
vehicle.rail:train=Zug
vehicle.rail:weight=Gewicht

weight_unit:kg=kg
#weight_unit:long_tons=Long tons
#weight_unit:short_tons=Short tons
weight_unit:ton=ton

#world:boards=Boards
world:clock=Uhr
#world:controllers=Controllers
#world:decoders=Decoders
#world:edit=Edit world
world:inputs=Eingänge
world:interfaces=Schnittstellen
world:lua_scripts=Lua-Skripte
#world:mute=Mute
#world:no_smoke=No smoke
world:offline=Trennen
world:online=Verbinden
#world:outputs=Outputs
#world:power_off=Power off
#world:power_on=Power on
#world:rail_vehicles=Rail vehicles
#world:run=Run
world:scale=Maßstab
world:scale_ratio=Maßstabsverhältnis
world:simulation=Simulation
world:stop=Halt
world:trains=Züge
world:uuid=UUID

#world_scale:custom=Custom
world_scale:h0=H0 (1:87)
world_scale:n=N (1:160)
world_scale:tt=TT (1:120)
world_scale:z=Z (1:220)

#xpressnet_command_station:custom=Custom
xpressnet_command_station:digikeijs_dr5000=Digikeijs DR5000
xpressnet_command_station:roco_10764=Roco 10764

xpressnet_interface_type:network=Netzwerk
xpressnet_interface_type:serial=Serielle

#xpressnet_serial_interface:custom=Custom
xpressnet_serial_interface:lenz_li100=Lenz LI100
xpressnet_serial_interface:lenz_li100f=Lenz LI100F
xpressnet_serial_interface:lenz_li101f=Lenz LI101F
xpressnet_serial_interface:rosoft_s88xpressnetli=RoSoft s88XpressNetLI

#xpressnet_serial_interface_type:custom=Custom
#xpressnet_serial_interface_type:digikeijs_dr5000=Digikeijs DR5000
#xpressnet_serial_interface_type:lenz_li100=Lenz LI100
#xpressnet_serial_interface_type:lenz_li100f=Lenz LI100F
#xpressnet_serial_interface_type:lenz_li101f=Lenz LI101F
#xpressnet_serial_interface_type:lenz_liusb=Lenz LIUSB
#xpressnet_serial_interface_type:rosoft_s88xpressnetli=RoSoft s88XpressNetLI

#xpressnet_settings:use_emergency_stop_locomotive_command=Use short emergency stop locomotive command
#xpressnet_settings:use_roco_f13_f20_command=Use Roco F13-F20 command

z21_channel:rbus=R-Bus

#z21_settings.server:allow_emergency_stop=Allow emergency stop
#z21_settings.server:allow_track_power_off=Allow power off
#z21_settings.server:allow_track_power_on_release_emergency_stop=Allow power on/emergency stop release