GitMigration
/
oled-display
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Update lcd.c

Browse Source
pull/7/head
Sylaina 6 years ago committed by GitHub
parent dc337751ab
commit 981140645e
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 115 additions and 34 deletions
Show Stats Download Patch File Download Diff File

123
lcd.c
Unescape Escape View File

@ -62,29 +62,29 @@ static uint8_t displayBuffer[DISPLAY_HEIGHT/8][DISPLAY_WIDTH];
const uint8_t init_sequence [] PROGMEM = { // Initialization Sequence
LCD_DISP_OFF, // Display OFF (sleep mode)
0x20, 0b00, // Set Memory Addressing Mode
LCD_DISP_OFF, // Display OFF (sleep mode)
0x20, 0b00, // Set Memory Addressing Mode
// 00=Horizontal Addressing Mode; 01=Vertical Addressing Mode;
// 10=Page Addressing Mode (RESET); 11=Invalid
0xB0, // Set Page Start Address for Page Addressing Mode, 0-7
0xC8, // Set COM Output Scan Direction
0x00, // --set low column address
0x10, // --set high column address
0x40, // --set start line address
0x81, 0x3F, // Set contrast control register
0xA1, // Set Segment Re-map. A0=address mapped; A1=address 127 mapped.
0xA6, // Set display mode. A6=Normal; A7=Inverse
0xA8, 0x3F, // Set multiplex ratio(1 to 64)
0xA4, // Output RAM to Display
0xB0, // Set Page Start Address for Page Addressing Mode, 0-7
0xC8, // Set COM Output Scan Direction
0x00, // --set low column address
0x10, // --set high column address
0x40, // --set start line address
0x81, 0x3F, // Set contrast control register
0xA1, // Set Segment Re-map. A0=address mapped; A1=address 127 mapped.
0xA6, // Set display mode. A6=Normal; A7=Inverse
0xA8, 0x3F, // Set multiplex ratio(1 to 64)
0xA4, // Output RAM to Display
// 0xA4=Output follows RAM content; 0xA5,Output ignores RAM content
0xD3, 0x00, // Set display offset. 00 = no offset
0xD5, // --set display clock divide ratio/oscillator frequency
0xF0, // --set divide ratio
0xD9, 0x22, // Set pre-charge period
0xDA, 0x12, // Set com pins hardware configuration
0xDB, // --set vcomh
0x20, // 0x20,0.77xVcc
0x8D, 0x14, // Set DC-DC enable
0xD3, 0x00, // Set display offset. 00 = no offset
0xD5, // --set display clock divide ratio/oscillator frequency
0xF0, // --set divide ratio
0xD9, 0x22, // Set pre-charge period
0xDA, 0x12, // Set com pins hardware configuration
0xDB, // --set vcomh
0x20, // 0x20,0.77xVcc
0x8D, 0x14, // Set DC-DC enable
};
@ -217,12 +217,88 @@ void lcd_putc(char c){
}
// print char at display
#ifdef GRAPHICMODE
#ifdef BIGCHAR
uint16_t doubleChar[sizeof(FONT[0])];
uint8_t dChar;
for (uint8_t i=0; i < sizeof(FONT[0]); i++) {
doubleChar[i] = 0;
dChar = pgm_read_byte(&(FONT[(uint8_t)c][i]));
for (uint8_t j=0; j<8; j++) {
if ((dChar & (1 << j))) {
doubleChar[i] |= (1 << (j*2));
doubleChar[i] |= (1 << ((j*2)+1));
}
}
}
for (uint8_t i = 0; i < sizeof(FONT[0]); i++)
{
// load bit-pattern from flash
displayBuffer[cursorPosition.y+1][cursorPosition.x+(2*i)] = doubleChar[i] >> 8;
displayBuffer[cursorPosition.y+1][cursorPosition.x+(2*i)+1] = doubleChar[i] >> 8;
displayBuffer[cursorPosition.y][cursorPosition.x+(2*i)] = doubleChar[i] & 0xff;
displayBuffer[cursorPosition.y][cursorPosition.x+(2*i)+1] = doubleChar[i] & 0xff;
}
#else
for (uint8_t i = 0; i < sizeof(FONT[0]); i++)
{
// load bit-pattern from flash
displayBuffer[cursorPosition.y][cursorPosition.x+i] =pgm_read_byte(&(FONT[(uint8_t)c][i]));
}
#endif
#elif defined TEXTMODE
#ifdef BIGCHAR
uint16_t doubleChar[sizeof(FONT[0])];
uint8_t dChar;
for (uint8_t i=0; i < sizeof(FONT[0]); i++) {
doubleChar[i] = 0;
dChar = pgm_read_byte(&(FONT[(uint8_t)c][i]));
for (uint8_t j=0; j<8; j++) {
if ((dChar & (1 << j))) {
doubleChar[i] |= (1 << (j*2));
doubleChar[i] |= (1 << ((j*2)+1));
}
}
}
i2c_start(LCD_I2C_ADR << 1);
i2c_byte(0x40);
for (uint8_t i = 0; i < sizeof(FONT[0]); i++)
{
// print font to ram, print 6 columns
i2c_byte(doubleChar[i] & 0xff);
i2c_byte(doubleChar[i] & 0xff);
}
i2c_stop();
#if defined SSD1306
uint8_t commandSequence[] = {0xb0+y, 0x21, x, 0x7f};
#elif defined SH1106
uint8_t commandSequence[] = {0xb0+cursorPosition.y+1, 0x21, 0x00+((2+cursorPosition.x) & (0x0f)), 0x10+( ((2+cursorPosition.x) & (0xf0)) >> 4 ), 0x7f};
#endif
lcd_command(commandSequence, sizeof(commandSequence));
i2c_start(LCD_I2C_ADR << 1);
i2c_byte(0x40);
for (uint8_t j = 0; j < sizeof(FONT[0]); j++)
{
// print font to ram, print 6 columns
i2c_byte(doubleChar[j] >> 8);
i2c_byte(doubleChar[j] >> 8);
}
i2c_stop();
commandSequence[0] = 0xb0+cursorPosition.y;
#if defined SSD1306
commandSequence[2] = cursorPosition.x+(2*sizeof(FONT[0]));
#elif defined SH1106
commandSequence[2] = 0x00+((2+cursorPosition.x+(2*sizeof(FONT[0]))) & (0x0f));
commandSequence[3] = 0x10+( ((2+cursorPosition.x+(2*sizeof(FONT[0]))) & (0xf0)) >> 4 );
#endif
lcd_command(commandSequence, sizeof(commandSequence));
#else
i2c_start(LCD_I2C_ADR << 1);
i2c_byte(0x40);
for (uint8_t i = 0; i < sizeof(FONT[0]); i++)
@ -231,8 +307,13 @@ void lcd_putc(char c){
i2c_byte(pgm_read_byte(&(FONT[(uint8_t)c][i])));
}
i2c_stop();
#endif
#endif
#ifdef BIGCHAR
cursorPosition.x += sizeof(FONT[0])*2;
#else
cursorPosition.x += sizeof(FONT[0]);
#endif
break;
}
@ -360,5 +441,5 @@ void lcd_display() {
lcd_data(displayBuffer[i], sizeof(displayBuffer[i]));
}
#endif
#endif
}
#endif

Write Preview
Loading…
Cancel
Save